Fachhandwerkerempfehlung | Schlüter-Systems

Get an individual quote in a snap. Free of charge and obligation.
Simply answer the following questions.

1. Project
2. Project type
3. Structure
4. Screed
5. Result

The heated floor space is approx. m².

I plan to install a floor heating system in
(Click as applicable)

a single-family home

an apartment

a commercial building

showroom space
Is this a new construction or a renovation project?
(Click as applicable)

New construction

Renovation
What is the desired assembly height?
(Click as applicable)

low height (screed thickness from 31 mm)

normal height
Will the assembly be built over an existing screed?
(Click as applicable)

Yes, there is a screed

No, there is no screed
What is the desired assembly height?
(Click as applicable)

low height (screed thickness from 31 mm)

normal height
Which type of screed would you like to use?
(Click as applicable)

Cementitious screed

Flowing screed

I don't know
Which assembly would you like to use?
(Click as applicable)

Assembly with impact sound insulation, in buildings with poor/insufficient insulation

Assembly with impact sound insulation, in buildings with good/sufficient insulation

Assembly without impact sound insulation, in buildings with poor/insufficient insulation

Assembly without impact sound insulation, in buildings with good/sufficient insulation
Which type of screed would you like to use?
(Click as applicable)

Cementitious screed

Flowing screed

I don't know
Product recommendation

We recommend an assembly with the system panel for your construction project
.

The price per m² for your floor heating system is

With a heated area of m² results in a total price of

* Basic costs include studded screed panels, heating pipes, edging strips, plus DITRA if using ceramic tile coverings.
** Total costs include €/m² for heating circuit distributors, distributor cabinet and accessories.
All costs are calculated based on gross list prices, not including VAT

The cost of the Schlüter-BEKOTEC-THERM floor heating system depends on several project-specific factors. Calculation factors include the number and size of rooms, the number of heating circuits, the heating pipe spacing as well as the desired control technology.

Prices do not include the cost of labour. These values only represent calculated guidelines, which may differ for specific projects. Further installation components, such as insulation, Schlüter-DITRA, Schlüter-DITRA-HEAT or Schlüter-DITRA-DRAIN 4 and the covering need to be taken into account as well.

Go to Contact form

Request quote

Print